COPPER PIPES ARE JUST PLAIN BETTER!
Galvanized water piping rusts and corrodes internally. When drawing water from galvanized water pipes, particles of rust, zinc, and other contaminants flow into your drinking water. These contaminants also clog the pipe internally stopping the flow of water to fixtures.
DO YOU NEED NEW COPPER WATER PIPING?
Can your family take a comfortable shower, wash dishes, water the lawn, and wash the laundry at the same time? When you draw water into the bath tub does the water look rust colored? Are you sure there are no leaks in the walls or under the house?
- Leaky Pipes?
- Low Water Pressure?
- Yellow or Rust-Colored Water?
- Bad Tasting Water?
- Inconsistent Hot & Cold Temperature Changes in Shower?
- Rust Spots On Washed Clothing?
COPPER WATER PIPING LASTS FOR OVER 100 YEARS!
With copper water piping your water will be cleaner and flow faster. Copper water piping never corrodes or clogs up internally. Copper water piping allows your family to be able to take a comfortable shower, wash dishes, water the lawn, wash laundry, and in fact, use all faucets and fixtures at the same time.
WHAT IS REPIPING?
Re-piping is a process of replacing the supply pipes in a dwelling or business. It is not a temporary fix or a replacement of short sections of pipe, but a complete replacement of your supply plumbing system. There are several reasons you may need to repipe your home or business. Corrosion of pipes may cause low water pressure, rusty colored water, reduced water flow, or leaks. If you are going to remodel it is a good time to repipe before you paint or finish your walls. It is important to understand the scope of the project before work is started. If you notice an isolated leak or a small portion of your existing piping leaking, or valves that are corroded or cracked, it is quite possibly an indication of a larger problem.
Repiping is a process of installing a new copper repipe system. This process usually includes removing old readily accessible pipe and then installing the new plumbing system. Included in the process is the installation of new USA type “L” hard copper, properly strapped and secured, install kwik 1/4 turn ball type water stops, install new stainless steel water supply lines. After the new piping system is installed the water is turned back on, the system is pressure tested and then flushed out. The repiping process takes 1-3 days to install the new piping system. After the actual plumbing replacement, there will be some required wall patching.
A professional site inspection is critical to a successful repiping process. Standard repiping projects include installation of all new hot and cold domestic water piping from the water source to all existing faucets and fixtures. Unless specifically included in the proposal, drain replacement and fixtures are not included.
There are various materials used in re-piping, in water supply re-piping some of the materials are metal and perhaps some plastic pipes. The metal pipes are galvanized steel or iron, brass, and copper. The plastic pipes are Poly Vinyl Chloride PVC, Chlorine Poly Vinyl Chloride CPVC, Poly Ethylene PE, Polybutylene PB, and Kitec. Most of these plastic pipe systems will end in lawsuits. Part of the problem is with the fittings that are often cheaply made with little quality control by a verity of overseas companies. Plastic pipes also have questionable joining methods. Plastic pipes are glued, crimped, and banded. When plastic pipes blow a joint they blow apart and result in water damage. Plastics become brittle with age and heat. There are also issues about the molecular structure of plastics and the resins from which they are made.
In rare instances a CPVC repipe maybe recommended where the water PH levels are a problem.
A new trend in re-piping is sand blasting the inside of worn thin pipe and the painting the inside of the worn pipe with epoxy paint. Sometimes during the sandblasting the sandblasting will wear thin and blow through the wall of joints and pipes. Some of those thin spots leak right away and sometimes those leaks come days or weeks later. Leaking pipes that are epoxy-coated end up needing to be properly re-piped by installing a CDA copper re-pipe.
Contact Us Today For A FREE Estimate, No Obligation
Click here to email us or call Toll free at (888) 4HENRIK/ 888-443-6745